Facebook
Categories

CNC Surface Roughness: Ra vs. Rz and Drawing Guide

Understand Ra vs. Rz surface roughness, how to specify CNC machined surface finishes, inspection methods, and cost considerations for custom parts.
Nov 5th,2026 16 Views

CNC Surface Roughness: Ra vs. Rz and How to Specify Surface Finish on Drawings

When sourcing custom CNC machined components, dimensional tolerances are usually one of the first requirements buyers review. However, surface roughness can be equally important for parts involving sliding contact, sealing, bearing fits, and precision assembly.

A drawing may specify Ra 0.8 µm, Ra 1.6 µm, or Rz 6.3 µm. These values may appear straightforward, but misunderstanding them can result in higher machining costs, inconsistent inspection results, or parts that fail to meet their functional requirements.

For engineers and purchasing managers, the objective is not simply to request the smoothest possible surface. It is to specify the surface texture that the application actually needs.

This guide explains the difference between Ra and Rz, how surface roughness affects CNC machining, and what buyers should include in their drawings and RFQs.

1. What Is Surface Roughness in CNC Machining?

Surface roughness describes the relatively fine-scale irregularities present on a manufactured surface.

Even when a machined component appears smooth to the naked eye, microscopic peaks and valleys remain after cutting.

These features may be influenced by:

  • Cutting tool geometry and condition

  • Feed rate and cutting speed

  • Workpiece material

  • Machine and fixture rigidity

  • Vibration and chatter

  • Toolpath strategy

  • Secondary finishing operations

Surface roughness is one component of surface texture. Other characteristics include waviness and lay, which describe different aspects of surface geometry.

The ASME B46.1 surface texture standard addresses roughness, waviness, lay, and related measurement parameters.

A surface roughness requirement should therefore be treated as a measurable engineering specification rather than a general request for a visually smooth finish.

2. What Does Ra Mean?

Ra is the arithmetic mean of the absolute deviations of a roughness profile from its mean line over the applicable evaluation length.

In simpler terms, Ra describes the average magnitude of the profile's height variations.

It is one of the most widely recognized roughness parameters in engineering drawings.

For example:

  • Ra 3.2 µm indicates a roughness limit commonly encountered on general machined surfaces.

  • Ra 1.6 µm represents a more restrictive requirement.

  • Ra 0.8 µm requires a lower average profile roughness.

  • Ra 0.4 µm represents a still more demanding requirement.

These values are illustrative drawing requirements, not guaranteed results for a particular machine, material, or manufacturing process.

The ability to achieve a specified Ra depends on the component geometry, material, machining method, and available finishing processes.

Important limitation of Ra

Ra is an average-based parameter.

Two surfaces can have similar Ra values while having different peak shapes, valley depths, or surface distributions.

Therefore, identical Ra measurements do not necessarily mean that two surfaces will behave identically in contact, lubrication, or sealing applications.

For critical functional surfaces, additional parameters or performance requirements may be necessary.

3. What Does Rz Mean?

Rz is a surface roughness height parameter that describes peak-to-valley characteristics of a measured profile.

Unlike Ra, which represents an arithmetic average of absolute profile deviations, Rz is more directly related to vertical profile extremes.

However, the exact definition and calculation of Rz depend on the applicable standard and its edition.

Historical and current standards have not always defined Rz in the same way.

This is especially important when comparing drawings prepared under different national or international standards.

Why buyers should not convert Ra directly into Rz

A common mistake is to assume that Rz can always be calculated by multiplying Ra by a fixed number.

In reality, the relationship depends on the actual surface profile and the measurement definition.

Two surfaces with the same Ra may have different Rz values.

A conversion ratio may be useful as a rough internal estimate in some circumstances, but it should not replace a specified measurement or serve as a contractual acceptance rule without validation.

For a drawing that requires both Ra and Rz, each parameter should be evaluated according to the agreed standard.

4. Ra vs. Rz: Key Differences

Factor Ra Rz
Basic meaning Arithmetic mean roughness height Peak-to-valley-related roughness height parameter
Main emphasis Average profile deviation Vertical profile characteristics
Sensitivity to isolated features Averaging can reduce the influence of isolated extremes More sensitive to certain pronounced peaks and valleys
Typical use General surface roughness specification Additional control of profile height characteristics
Main limitation Does not fully describe surface shape Definition depends on the applicable standard
Direct conversion Not universally valid Not universally valid

Neither parameter alone fully describes every functional characteristic of a surface.

The correct choice depends on the engineering application and the inspection method.

5. How Surface Roughness Affects Part Performance

Surface texture can influence friction, wear, lubrication, sealing, and other functional properties.

The U.S. National Institute of Standards and Technology (NIST) identifies these relationships in its Surface Texture and Forensic Topography program.

Sliding and bearing surfaces

For shafts, bushings, and other sliding components, surface texture may influence lubricant retention, contact behavior, and wear.

A very rough surface can contribute to undesirable contact conditions.

However, an extremely smooth surface is not automatically optimal for every lubricated interface.

The appropriate surface texture depends on the material pairing, lubrication regime, load, speed, and design.

Sealing surfaces

A gasket or sealing interface may require controlled surface texture to maintain suitable contact.

Excessive roughness can create leakage paths in some applications, while surface lay and localized defects may also affect sealing.

For critical seals, Ra alone may not be sufficient to define the surface condition.

Precision mating surfaces

Surface irregularities can influence how mating components contact each other.

This can be important for locating faces, clamped joints, and precision assemblies.

However, surface roughness should not be confused with flatness, roundness, or dimensional accuracy.

A surface can meet its Ra requirement and still fail a flatness or size tolerance.

6. How Does Surface Roughness Affect CNC Machining Cost?

More restrictive surface finish requirements can increase manufacturing cost, particularly when they require additional operations.

Potential cost factors include:

  • Reduced feed rates

  • Additional finishing passes

  • More frequent tool changes

  • Specialized cutting tools

  • Grinding, honing, lapping, or polishing

  • Longer inspection time

  • Increased scrap or rework risk

The actual cost difference depends on the material, part geometry, production quantity, and manufacturing process.

Practical example: A custom stainless steel shaft

Consider a hypothetical stainless steel shaft with several functional areas.

The bearing seat requires controlled dimensions and surface texture.

A non-contact external section has no critical surface function.

Specifying the same restrictive Ra value across the entire shaft may increase machining effort without improving performance.

A more economical drawing could apply the tighter surface requirement only to the bearing seat and other functional areas.

The remaining surfaces could use a less restrictive requirement, subject to appearance and manufacturing needs.

This approach helps align machining cost with functional requirements.

For an example of CPRMFG's related product category, see Swiss Machining Stainless Steel Parts.

7. Is Ra 0.8 Always Better Than Ra 1.6?

No.

Ra 0.8 µm represents a lower roughness limit than Ra 1.6 µm when evaluated under comparable measurement conditions.

However, a lower numerical value is not automatically better for every application.

A noncritical bracket surface may perform adequately with a less restrictive finish.

A precision sliding or sealing surface may require a more carefully controlled texture.

Some functional applications also depend on profile shape, directional lay, or other characteristics not fully captured by Ra.

The engineering objective is to specify the surface condition necessary for the part's function, not to minimize Ra indiscriminately.

A useful purchasing principle

If the supplier proposes a more expensive finishing operation to meet a roughness requirement, ask whether the requirement is functionally necessary and whether the process has been validated.

Any change to a customer-controlled drawing must receive the appropriate engineering approval.

8. Surface Roughness vs. Surface Finish: Are They the Same?

The terms are often used interchangeably in everyday manufacturing discussions, but they are not identical in a technical sense.

Surface roughness is a measurable component of surface texture.

Surface finish is a broader expression that may refer to the final appearance, manufacturing treatment, or texture of a component.

For example, a drawing might specify:

  • A surface roughness parameter

  • A polishing requirement

  • An anodized coating

  • A brushed appearance

  • A protective plating

  • A cosmetic acceptance condition

These requirements describe different properties and should not be treated as substitutes for one another.

A visually polished surface does not automatically prove compliance with a numerical roughness limit.

Likewise, a surface that passes Ra inspection may still fail a cosmetic requirement.

9. How to Specify Surface Roughness on Engineering Drawings

A clear surface roughness specification should identify the required parameter and the applicable technical standard.

The ISO 21920-1:2021 standard defines rules for indicating profile surface texture requirements using graphical symbols in technical product documentation.

ASME B46.1 provides another established framework for surface texture terminology and parameters.

When preparing a drawing, consider the following:

Identify critical surfaces

Apply specific requirements to functional features such as bearing seats, sealing faces, and precision contact areas.

Specify the parameter and limit

State the required Ra, Rz, or other relevant parameter with the appropriate unit and acceptance interpretation.

Identify the governing standard

Use the applicable standard and edition, especially when exchanging drawings internationally.

Consider measurement direction

Machining marks can be directional.

The measurement direction and surface lay may matter for certain applications.

Avoid ambiguous general notes

A statement such as "all surfaces smooth" is difficult to verify consistently.

Where surface texture is important, use measurable requirements.

Define the finished condition

If a component will be plated, coated, polished, or otherwise finished, clarify whether the roughness requirement applies before or after the specified finishing operation.

10. How Is Surface Roughness Measured?

Surface roughness may be measured using contact or non-contact instruments.

Contact stylus profilometers

A stylus profilometer traces the surface with a small probe and records profile height variations.

The instrument and software calculate roughness parameters from the measured profile.

The stylus tip, filtering, measurement length, and calibration conditions can influence the result.

NIST describes stylus-based measurement and calibration in its surface roughness and step-height calibration research.

Optical measurement systems

Optical instruments can evaluate surface topography without physical stylus contact.

Different technologies may be suitable for different surface materials, geometries, and roughness ranges.

However, results from different measurement methods are not automatically interchangeable.

NIST has documented differences between optical and stylus measurements under certain conditions.

Why inspection conditions matter

A roughness report should identify the measured parameter and relevant test conditions.

Depending on the specification, useful information may include:

  • Instrument type

  • Measurement location

  • Measurement direction

  • Evaluation length

  • Filtering settings

  • Applicable standard

  • Measured result

  • Calibration or traceability information

The inspection method should be agreed upon before production when the surface requirement is critical.

11. Practical Example: Precision Machined Valve Component

Consider a hypothetical CNC machined stainless steel valve component.

The component contains:

  • A sealing face

  • A cylindrical locating diameter

  • A threaded port

  • Several noncritical external surfaces

The sealing face may require a controlled texture to support the selected sealing system.

The locating diameter may require dimensional accuracy and an appropriate surface condition for assembly.

The threaded port must meet its thread specification, which is separate from a general surface roughness requirement.

The noncritical external surfaces may not need the same finish as the functional features.

A drawing that distinguishes these requirements allows the supplier to plan machining and inspection more effectively.

It also helps the buyer compare quotations on a consistent technical basis.

12. Surface Roughness RFQ Checklist for Buyers

Before requesting a quotation for precision CNC machined components, confirm the following information:

  1. Is the engineering drawing revision clearly identified?

  2. Are critical functional surfaces marked?

  3. Are Ra, Rz, or other texture parameters specified where needed?

  4. Is the governing surface texture standard identified?

  5. Are dimensional and geometric tolerances separately defined?

  6. Is the required final surface treatment specified?

  7. Does the roughness requirement apply before or after finishing?

  8. Are inspection locations and methods agreed upon?

  9. Are material grade and heat-treatment requirements provided?

  10. Are the order quantity and expected annual demand stated?

If a drawing contains unusually restrictive surface requirements, ask the manufacturer to review feasibility before quotation approval.

A technical clarification before production is generally more efficient than resolving an inspection disagreement after parts have been delivered.

Conclusion: Specify Surface Roughness Based on Function

Ra and Rz are useful surface texture parameters, but they describe different characteristics of a manufactured surface.

Ra provides an arithmetic average measure of profile roughness, while Rz addresses peak-to-valley-related height characteristics under the applicable definition.

Neither parameter should be selected without considering the component's function, manufacturing process, and inspection requirements.

For custom CNC machined parts, a well-prepared drawing identifies critical surfaces, applies appropriate texture requirements, and avoids unnecessarily restrictive specifications on nonfunctional areas.

This helps manufacturers develop suitable machining plans and allows buyers to compare quotations more effectively.

CPRMFG supports drawing-based sourcing of custom precision components across manufacturing processes. You can explore our Swiss machining stainless steel components or learn more about our precision manufacturing services.

Need a quotation for custom CNC machined parts? Contact CPRMFG and submit your engineering drawings, material grade, quantity, surface roughness requirements, and any critical inspection specifications. Our team can review your project requirements and discuss a suitable manufacturing quotation.

Frequently Asked Questions

1. What is the difference between Ra and Rz?

Ra measures the arithmetic mean of absolute roughness profile deviations. Rz describes peak-to-valley-related profile height characteristics, with its exact definition determined by the applicable standard.

2. Is Ra 0.8 smoother than Ra 1.6?

Ra 0.8 µm is a lower arithmetic mean roughness value than Ra 1.6 µm. However, lower Ra does not necessarily mean better functional performance for every application.

3. Can Ra be converted directly into Rz?

There is no universally valid fixed conversion. The relationship depends on the actual surface profile and the relevant measurement definitions.

4. Does CNC machining always achieve Ra 0.8?

No. Achievable roughness depends on material, cutting method, geometry, tool condition, machine rigidity, and finishing operations.

5. Does surface roughness affect machining cost?

Yes. More restrictive requirements may increase machining time, require secondary finishing, or add inspection costs.

6. Can a part pass Ra inspection but fail its functional requirements?

Yes. Ra alone does not control all aspects of surface texture, geometry, material behavior, or assembly performance.

7. Which standard should be used for surface roughness?

ISO 21920-1 and ASME B46.1 are relevant standards for surface texture indication and specification. The applicable standard should be selected according to the drawing, customer requirements, and contractual agreement.

Technical References